Limelight Frolic
Highlights
- Dual heating styles: The device includes both session mode and demand mode so users can choose between sustained heating or button-activated heating.
- Wide temperature control: Session mode is listed at 40–220°C and demand mode is listed at 40–240°C.
- Adjustable airflow: Airflow can be adjusted from 0–25 l/min by rotating the cooling unit or mouthpiece control area.
- Removable battery: The unit uses a removable Molicel P50B 5000mAh battery for charging flexibility and battery replacement.
- USB-C charging: The battery can be charged through the device’s 5V/2A USB-C port or with an external charger.
- OLED display: The 0.96-inch color OLED screen shows temperature, timer or draw information, battery level, charging, and operating mode.
- Cooling pathway: The cooling unit is described as having more than 200mm of pathway length to cool vapor before inhalation.
- Herb oven: The oven is listed at approximately 1/4g capacity and uses a mix of convection with a portion of conduction heat transfer.
- Serviceable design: The brochure states the cooling unit comes apart for cleaning, uses standard Viton O-rings, and includes dishwasher-safe parts.
- Attachment support: The device supports quick-swap attachments, including optional 14mm and 18mm water-piece connections.
In the Box
- Frolic thermal extractor device:Main body of the unit with screen, controls, heater, and oven.
- Cooling unit:The upper section that routes and cools vapor before inhalation.
- Mouthpiece:The inhalation piece attached to the cooling unit.
- Removable battery:Power source for operating the device.
Overview
The Frolic Thermal Extractor is a handheld herb device with adjustable airflow, a removable battery, a color OLED screen, and two operating styles: session mode and demand mode. Its heating system works through convection extraction, while the oven contributes a smaller amount of conduction heat.
It also features a stainless steel 120W heater, an oven capacity of about 1/4g / 1.4ccm, vibration and LED notifications, USB-C charging, and support for optional quick-swap 14mm and 18mm water attachments. The cooling unit uses a vapor path longer than 200mm, and the body is made from Ultem (PEI) and PEEK with a PEEK airpath.
FAQs
What type of material is this made for?
The Frolic is made for herb and uses an oven sized for approximately 1/4g.
What is the difference between session mode and demand mode?
Session mode keeps the heater active until the session ends or the button is pressed again. Demand mode heats only while the button is held, then stops when released.
Does it have adjustable temperature?
Yes. Session mode ranges from 40–220°C, while demand mode ranges from 40–240°C.
Can the battery be replaced?
Yes. The battery is removable, so it can be swapped out, charged externally, or replaced when needed.
How is airflow adjusted?
Airflow is adjusted by rotating the control on the cooling unit or mouthpiece area, with a range of 0–25 l/min.
Can it be connected to glass?
Yes. Optional 14mm and 18mm water attachments are available for water piece compatibility.
Total beginner? Read this
What this product is:
This is a handheld herb extractor with an oven, heater, cooling unit, and mouthpiece.
How the heating works:
The Frolic uses convection as its main extraction method, with a smaller amount of conduction heat coming from the oven.
How session mode works:
In session mode, the heater stays active so you can take draws over a longer period without reheating each time.
How demand mode works:
In demand mode, the heater only runs while the button is pressed, making it better for shorter heating bursts and more direct control.
Why airflow matters:
Adjustable airflow changes how much air moves through the heater and can affect draw resistance and overall feel.
Why the cooling unit matters:
The extended vapor path helps cool the vapor before it reaches the mouthpiece, even across different airflow settings.
Specs
Dimensions: 105 x 63 x 24 mm
Weight: 245g (with battery)
Body materials: Ultem (PEI), PEEK
Airpath materials: PEEK
Oven capacity: approximately 1/4g / 1.4ccm
Airflow control: 0–25 l/min
Heater: Stainless Steel 120W CTS
Battery: Molicel P50B 5000mAh, removable
Input: 5.0V = 2.0A
Screen: 0.96″ Color OLED
Session mode: 40–220°C
Demand mode: 40–240°C
Specs
| Vaporizer Name | Frolic Thermal Extractor |
| Brand | Limelight |
| Compatible With | Array |
| Body Material | PEEK |
| Heating Method | Hybrid |
| Battery Capacity | 500mAh |
| Adjustable Airflow | Yes |