SLX V2.5 Ceramic Coat Grinder

The SLX V2.5 Ceramic Coat Grinder (also searched as SLX 2.5 or SLX non-stick grinder) is a 4-piece herb grinder machined from 7075-T6 aluminum and coated inside and out with a non-stick ceramic finish. Resin has nothing to grip, so the lid keeps turning smoothly and the teeth stay clean between uses. The coating contains no Teflon or PTFE.

It comes in three sizes: a 2″ (50mm) pocket grinder, the 2.4″ (62mm) standard size and the 3.5″ (88mm) BFG for large batches. Every size uses the same trapezoid teeth, lift-out screen and magnetic lid. Compare it with the rest of our herb grinders.

Pick your size

Features

• Ceramic coating: Every lip, tooth and chamber is coated, including the pollen catcher. No Teflon or PTFE.
• 7075-T6 aluminum: A harder alloy than the 6-series aluminum most grinders use, so threads and teeth resist bending and cross-threading.
• Trapezoid teeth: Each tooth has four cutting edges for a fluffy, even grind that drops through to the chamber below.
• Lift-out screen: The stainless steel pollen screen lifts out with no threads, so pollen is not disturbed each time you empty the chamber.
• One set of threads: Only one threaded joint, ceramic coated to stay smooth.
• Magnetic lid: Neodymium magnets keep the lid closed in a bag or pocket.
• Shorter profile: The lift-out screen makes each size about 20% shorter than a standard 4-piece grinder.
• Grip cuts: Machined grip cuts make it easier to turn, including for weaker hands.

FAQs

• Which size should I get?: The 2″ fits a pocket. The 2.4″ suits most daily use. The 3.5″ BFG grinds a large batch in one load.
• Does it need cleaning?: The ceramic coating resists sticky buildup, so it needs far less cleaning than a bare aluminum grinder. Brush out loose material and pollen as needed.
• Is the coating Teflon?: No. It is a ceramic coating with no Teflon or PTFE, FDA-approved for food contact.
• Can I use it for vaporizers?: Yes. An even, fluffy grind packs well into dry herb vaporizers and heats more evenly.
• Can I skip the pollen screen?: Yes. The screen lifts out, so you can run it as a 3-chamber grinder or collect pollen with the screen in place.

Total beginner? Read this

• What a 4-piece grinder is: Four parts stack together: the lid with teeth, the grinding chamber, the lift-out screen and the pollen catcher at the bottom.
• Loading it: Open the lid and break your herb into small pieces. Place them between the teeth, not over the center post, then put the lid back on.
• Grinding: Hold the base and twist the lid back and forth a few times. The ground herb drops through the holes into the chamber below.
• Emptying it: Unscrew the chamber from the screen section and tap out the ground herb. The screen lifts out with no threads.
• The pollen catcher: Fine pollen falls through the stainless steel screen and collects in the bottom piece. Brush it out when you want to use it.
• Keeping it clean: The ceramic coating resists sticky buildup. Brush out loose material and pollen as needed.

Specs

• Sizes: 2″ (50mm), 2.4″ (62mm), 3.5″ BFG (88mm)
• Teeth: 27 on the 2″, 57 on the 2.4″ and 3.5″ BFG
• Tooth shape: Trapezoid, four cutting edges per tooth
• Body: 7075-T6 aluminum
• Coating: Non-stick ceramic, inside and out, FDA-approved, no Teflon or PTFE
• Pieces: 4 (lid, grinding chamber, lift-out screen, pollen catcher)
• Screen: Stainless steel, fine mesh, lifts out with no threads
• Lid: Neodymium magnet closure
• Colors: Black, Charcoal, Silver, Champagne Gold, Yellow Gold, Green, Purple, Pink and Blue on the 2″ and 2.4″. Black, Green and Purple on the 3.5″ BFG.

In the box

• 1x SLX V2.5 4-Piece Grinder: In the size and color you select.