The Wulf Evolve Maxxx is a collaborative product between Wulf Mods and Yocan. Called a “concentrate pen transformer” - when either of the included is used, you get a single device that can change between a nectar collector, a concentrate rig, and a traditional concentrate pen. It also features variable voltage, a built-in silicone jar, an XTAL Tip, and two interchangeable coils: the Quartz Dual Coil and Quartz Triple Coil.
How to Use
The Wulf Evolve Maxxx also features a pre-heat mode for quicker heating. To start pre-heating, click the power button 2x and the unit will pre-heat for 15 seconds. To stop, press the button 2x again.
- Variable Voltage: The current voltage is indicated by a small LED light: White 3.2V, Blue 3.7V, and Green 4.2V.
- Place your desired coil into the base and attach the mouthpiece.
- Screw the mouthpiece onto the battery.
- Remove the cap from the dual coil quartz or triple coil quartz atomizer and place your concentrates into the chamber.
- Close it back up and it’s good to go.
Concentrate Rig Mode
- Start by screwing the coil into the base of the device.
- Then screw the airflow piece into the base and screw that onto the battery.
- Once that is built, attach the glass adapter.
- Remove the cap from the dual coil quartz or triple coil atomizer and place your concentrates directly into the chamber.
- After this fill your rig with the desired amount of water.
- Insert the battery into the adapter of the rig.
- Once activated, inhale from the mouthpiece.
- Press the carb once the rig is filled with vapor to release airflow.
- Start by screwing the mouthpiece onto the top of the battery.
- On the other side of the device screw the base onto the battery and the nectar tip.
- Once the heating tip has warmed up to the desired temperature, press the tip against the concentrate and gently inhale.
There are no reviews yet.